Overview
the measurements of the component and will be able to with stand various types of steam, hot water,
gases, lubrications, sprinkling, and industrial processing systems.
Work Schedule: Varies by location. Must have open availability any time any day of the week. Length of
employment is limited to job assignment and/or project duration.
Essential Skills (may include but are not limited to the ability to: )
- Secure components together applying knowledge of geometry, physical properties of metal machining
weld shrinkage, and welding techniques.
- Select appropriate equipment and plan the layout and assembly of a welding process.
- Apply knowledge of geometry, physical properties of metal machining weld shrinkage and welding
techniques.
- Bolt, clamp and tack weld parts to secure in position for welding.
- Prepare material for welding by cutting or grinding using pipe cutters, hammer and chisel, cutting torch,
and/or grinder.
- Set material in stands, racks, hoists, etc. for welding.
- Set up equipment and weld parts using arc, gas shielded arc, submerged arc or gas welding equipment.
- Repair products by dismantling, straightening and reshaping.
- Reassemble parts using cutting torch, straightening press and hand tools.
- Read and understand plans, isometrics, arrangement drawings, details, specifications, erection
manuals, and/or blueprints and make decisions based on measurable criteria.
- Visualizes objects in three dimensions from plans and drawings.
- Measure, cut, bevel, grind, and fit pipe to specifications and blueprints.
- Pass Samuel EPC approved testing procedures for both structural and pipe welding.
- Fabricate for socket weld pipe from isometrics
- Identify pipe by size, type, and wall thickness
- Perform simple rigging operations
- Install pipe hangers, supports, anchors, and guides
- Work within precise limits and standards of accuracy.
- Follow oral and written directions
- Work within company policy as outlined in the Samuel EPC Craft Handbook and maintain compliance with both the Samuel EPC
Human Resources Policy Manual and the Samuel EPC Safety Manual.
- Perform other duties as assigned by the foreman/supervisor as needed.
Essential Qualifications
- Five (5) years minimum Field experience in trade
- Ability to identify all techniques of welding (TIG, MIG, arc, etc.), and know all properties of various
types of metal and how heat affects them.
- Ability to identify the requirements for various welding tests (6g, X ray, etc.) and to produce
welds that meet each requirement.
- Completion of certification administered by Samuel EPC
Ability to work with others to achieve job goals
- Read, write and communicate using the English language sufficient to perform job functions
(other preferences will be given for special language skills where there is a business need)
Physical Requirements
- Stand or walk for long periods of time
- Use arms and hands to reach for, handle or manipulate objects
- Lift and carry materials weighing up to 50 pounds; occasionally lift items weighing more than 50
pounds with assistance
- Climb up and down ladders, scaffolds and other objects
- Stoop, kneel, crouch and crawl
- See well (naturally or with correction)
- Eye hand coordination
- Good physical fitness
- Good sense of balance
- Work at great heights
Tool Requirements
- Steel toed work boots
- 25′ Steel Tape Measure
- TIG Rig with Argon hose, regulator and Power Cable (only applicable when tested for TIG
welder)
- Welding Helmet with #10 Filter Lens & Hard Hat Attachment
- Leather Gauntlet Type Welding Gloves (SMAW)
- Cutting Goggles With #5 or #6 Filter Lens
- Friction Lighter (Striker)
- Leather Sleeves
- 15′ Whip (Stinger) & Ground Connector
- Chipping Hammer
- Rod Pouch
- 9″ Side Cutters (Klein)
- 9-1/2″ Channel Lock Pliers
- 12″ Adjustable Wrench
- 12″ Half Round File with Handle
- Allen wrench Set to3/8″
- 4″ Screwdriver Slotted 1/4″ Tip
- Toolbox with Lock
- TIG Gloves
- Hand Brush S/S (Scratch)
- Hand Brush C/S (Scratch)
- Raincoat or poncho
Additional details:
- Provide own truck and welding source (machine must be capable of meeting welding Samuel
EPC’s welding standards)
- An agreed upon hourly rate will be paid for use of machine as long as machine is operational,
rig welder responsible for all repairs to machine.
- Activities other than welding will be required. Sitting in trucks waiting on next welds will not be
permitted.
It is good if you know a Helper that can come with you. If so please have them fill out the Helper Application on Samuelengineering.com.